China Flat Die Pto Pellet Mill Tractor Driven Pellet Machine double yoke pto shaft

Solution Description

PTO Pellet Mill Tractor

 

PTO Pellet Mill Tractor implies energy just take- off. It is made to be linked with a tractor or truck so that it can draw power from their engine. In comparison with other pellet mills, it is much more flexible, less complicated to run its construction is a lot more compact and its occupying space is lessened. Our PTO Pellet Mill is an excellent decision for farm-use end clients to make diverse varieties of biomass pellets and feed pellets. Materials can be employed to make pellets which includes a variety of types of agro-forestry wastes such as wood dust, noticed dust, straws, stalks, rice husk, healthcare herbs, bamboo dust and oil cakes, and so forth.

 

 

PTO Pellet Mill Tractor Functions
1. Our PTO Pellet Mill Tractor is linked with a tractor or truck for driving energy, which will remedy the difficulty of electricity transmission, even distant-managed operation is accessible.
2. Undertake new design of direct connection of motor shaft and the main shaft, linked and disconnected simply and conveniently, overcome the free defect of belt connecting after long time using.
three. High efficiency and output with minimal energy usage: reasonable and expert design, the equipment feeds and presses evenly, and discharges pellets with lower harm charge.
4. The concluded pellets are smooth and even, of higher normal hardness and warmth price.
5. Resilient and cost successful: the main element of the mill-the rollers are manufactured of prescise content of alloy steel which makes the roller anti-bearable and no easy to broken.

six.Different sorts of pore diameter flat die to pick.

Design Assort Tractor Energy Die Diameter Die Hole Specification Noticed Dust Capacity Feed Capacity Packing Dimensions
TOPS120P 6-10HP 120mm 2.5-10mm

forty-sixty kg/h

sixty-100 kg/h fifty seven*forty one*76(cm)
TOPS150P 6-12HP 150mm two.5-10mm 50-ninety kg/h 90-a hundred and twenty kg/h fifty seven*forty four*seventy six(cm)
TOPS200P ten-18HP 200mm 2.5-10mm one hundred ten-140 kg/h two hundred-300 kg/h seventy seven*56*102(cm)
TOPS230P eighteen-28HP 230mm 2.5-10mm a hundred and fifty-190 kg/h 300-four hundred kg/h seventy seven*fifty six*102(cm)
TOPS260P 28-45HP 260mm two.5-10mm 220-280 kg/h four hundred-600 kg/h seventy seven*fifty six*115(cm)
TOPS300P forty five-55HP 300mm 2.5-10mm 300-350 kg/h 600-800 kg/h seventy seven*eighty*116(cm)
TOPS360P fifty-60HP 360mm two.5-10mm 300-380 kg/h seven hundred-900 kg/h 77*85*116(cm)
TOPS400P fifty-70HP 400mm two.5-10mm four hundred-550 kg/h 900-1100kg/h 77*eighty five*116(cm)

Ultimate pellets are created by our PTO Pellet Mill Tractor

For animal feed , and for gas .

 

 

Our factory is 1 expert company mainly making varieties of pellet machine, hammer mill and other relevant devices CE, ISO certification. It has developed into a group enterprise whose business integrates scientific research, production, coaching and worldwide trade with more than 100 personnel, including 6 senior engineers, 19 mechanical designers, experts 20.

 

PTO pellet mill tractor photos

 

 

  

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Type: Flat Die Cone Wheel
Voltage: No
Automatic Grade: Manual

###

Samples:
US$ 700/Piece
1 Piece(Min.Order)

|

Order Sample

We accept OEM, Logo design

###

Customization:

###

Model Assort Tractor Power Die Diameter Die Hole Specification Saw Dust Capacity Feed Capacity Packing Size
TOPS120P 6-10HP 120mm 2.5-10mm

40-60 kg/h

60-100 kg/h 57*41*76(cm)
TOPS150P 6-12HP 150mm 2.5-10mm 50-90 kg/h 90-120 kg/h 57*44*76(cm)
TOPS200P 10-18HP 200mm 2.5-10mm 110-140 kg/h 200-300 kg/h 77*56*102(cm)
TOPS230P 18-28HP 230mm 2.5-10mm 150-190 kg/h 300-400 kg/h 77*56*102(cm)
TOPS260P 28-45HP 260mm 2.5-10mm 220-280 kg/h 400-600 kg/h 77*56*115(cm)
TOPS300P 45-55HP 300mm 2.5-10mm 300-350 kg/h 600-800 kg/h 77*80*116(cm)
TOPS360P 50-60HP 360mm 2.5-10mm 300-380 kg/h 700-900 kg/h 77*85*116(cm)
TOPS400P 50-70HP 400mm 2.5-10mm 400-550 kg/h 900-1100kg/h 77*85*116(cm)
Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Type: Flat Die Cone Wheel
Voltage: No
Automatic Grade: Manual

###

Samples:
US$ 700/Piece
1 Piece(Min.Order)

|

Order Sample

We accept OEM, Logo design

###

Customization:

###

Model Assort Tractor Power Die Diameter Die Hole Specification Saw Dust Capacity Feed Capacity Packing Size
TOPS120P 6-10HP 120mm 2.5-10mm

40-60 kg/h

60-100 kg/h 57*41*76(cm)
TOPS150P 6-12HP 150mm 2.5-10mm 50-90 kg/h 90-120 kg/h 57*44*76(cm)
TOPS200P 10-18HP 200mm 2.5-10mm 110-140 kg/h 200-300 kg/h 77*56*102(cm)
TOPS230P 18-28HP 230mm 2.5-10mm 150-190 kg/h 300-400 kg/h 77*56*102(cm)
TOPS260P 28-45HP 260mm 2.5-10mm 220-280 kg/h 400-600 kg/h 77*56*115(cm)
TOPS300P 45-55HP 300mm 2.5-10mm 300-350 kg/h 600-800 kg/h 77*80*116(cm)
TOPS360P 50-60HP 360mm 2.5-10mm 300-380 kg/h 700-900 kg/h 77*85*116(cm)
TOPS400P 50-70HP 400mm 2.5-10mm 400-550 kg/h 900-1100kg/h 77*85*116(cm)

Choosing the Right PTO Shaft For Your Tractor

There are a number of different PTO shaft types available for your tractor. These include the North American, German and Italian styles. They are also available in various series, each with different options for bearing diameter and cap-to-cap overall length. To choose the best shaft for your tractor, it’s important to know what kind of tractor you own and the type of PTO that you need.
Shaft Collar

IID shaft

When it comes to choosing the best IID shaft for your PTO, the selection process can be a challenge. Whether you are replacing the shaft in your own tractor or need to purchase one for a client, there are several factors to consider. The right PTO shaft for your tractor should be compatible with the equipment you currently use. For instance, a shaft that can be used in a farm tractor will fit a different farm tractor than one used in a construction machine.
First of all, a safety shield is a critical part of your IID shaft. The shielding will help keep the entire shaft free of any potential hazards. Typically, shielding will cover the straight part of the shaft, universal joints, and PTO connection. A shield can also help protect you from injury if you accidentally run into the shaft or touch the guard.
A power take off shaft will be the best choice if you are using a tractor for other applications, such as mowing, shredding, or plowing. A PTO shaft is also a crucial part if you own a large tractor or implement. It will allow you to operate your equipment with maximum efficiency.
An IID shaft is designed to slide into another piece when the tractor’s PTO is engaged. A disconnected IID shaft can pull the two pieces apart and cause the tractor to swing uncontrollably when it is engaged. This can cause serious injuries or even death. You should not engage a PTO if you aren’t certain of its strength.
To ensure the safety of the driveline shield, check for proper alignment of the PTO shaft. If it isn’t aligned properly, foreign materials can enter the shaft bearings. A damaged driveline shield can also lead to driveline separation, particularly when the tractor is making sharp turns or downhills. In addition, improper alignment of the drawbar may damage the protective shield that protects the shaft.
Choosing the right PTO series size requires proper measuring of each part. Measure the length of each yoke outside the PTO shaft and determine the appropriate PTO series size. The PTO yoke size chart can be helpful when choosing the correct size for your tractor.

Reverse PTO

Many different applications call for a reverse PTO shaft. These adapters allow the PTO shaft to be turned in the opposite direction of the engine, matching the rotation of the power take-off to the rotation of the equipment it drives. They can be used to space the power take-off away from the transmission case and improve clearance for a direct-coupled pump or driveshaft.
Reverse PTO shafts are available for CZPT . They are designed for six-spline 540-rpm applications. They also offer the option of multi-speed operation. Reversed PTOs are a great option for implements that can get stuck.
Reverse PTOs can be used on most types of PTO. The reverse version has a gearbox that allows it to rotate backward. These are ideal for implements that can get stuck in a field. A reverse PTO shaft makes it possible to work with the implement without having to wait for it to get unstuck.
When using a PTO, it’s important to know which type of gearbox is needed. If you have an older model, you’ll probably need a reverse PTO shaft. These are generally used on older, vintage tractors with ground drive PTO. The ground speed pTO shafts match the speed of the tractor’s final drive, so when the tractor is in reverse, the gearbox will turn backward. This feature will not function if you’re working stationary, though.
A tractor with a reverse PTO is important for a number of reasons. For example, the reverse PTO can help you turn a stuck tractor in the opposite direction, which is useful when a piece of farm equipment becomes stuck in mud or when you need to push a stuck implement back. In addition, it allows you to use the tractor’s power to operate various implements. The reverse PTO also helps you know how much power is needed to run various implements on various terrain.
In addition to being convenient, reverse PTO shafts also help reduce the risk of damage to implements attached to the PTO. It’s vital to keep a PTO shaft in good working order.
Shaft Collar

Square rigid shaft

When you are looking for a new square rigid PTO shaft, you should consider a few factors. Choosing the right one can be a challenge, as the process is not always simple. For instance, there are a lot of choices when it comes to different brands and interpretations. You can even choose to purchase a square rigid shaft that is not square.
Torsional rigidity is a measure of the ability of a shaft to resist torsional forces. The higher the value of J, the more rigid the shaft will be. For example, a steel shaft has a higher torsional rigidity than an HDPE shaft. The correct value of J can have a big impact on the design decisions.
Another factor to consider is the type of shaft coupling. Rigid shaft couplings are best for shafts that are perfectly aligned. While flexible couplings are flexible enough to accommodate small misalignments, they are not as flexible as the flexible ones. Rigid shaft couplings, which are typically made of metal, are not designed for high-speed rotation.
Rigid couplings are a good choice for a wide range of applications. Rigid couplings are available in many sizes and configurations, and can be used with either a powered or an unsupported shaft. Rigid couplings are also available with keyways to transmit torque.
Torsional rigidity depends on the geometry of the components. A higher torsional rigidity means a shaft is more resilient to twisting. However, excessive twisting can result in unstable performance. As a result, it is important to avoid over-twisting a shaft.
Flange couplings are another option. These couplings have two flanges that are attached to each other with bolts or nuts. They are very similar to split muff couplings and sleeve couplings. The difference is that flange couplings have two flanges – one for the shaft and one for the coupling hub.
If you are thinking about purchasing a square rigid PTO shaft for your tractor, be sure to consider the features that will best serve your specific needs. While you may be considering the price of this new shaft, remember that it is a machine part that could be dangerous.
Shaft Collar

Economy PTO

There are several standard types of PTO shafts. They can vary in diameter and number of splines, and are designed to work with a specific speed range. The following are the main differences between these types. Choosing the right type for your application will depend on its application. One of the most important considerations to make when choosing a PTO shaft is the ratio between the shaft’s diameter and the toothed wheels that are attached to it.
When choosing a PTO shaft, consider the amount of torque you need. In general, an economy PTO shaft should be able to support a maximum load of 540 Nm. In addition, it should be able to handle a high-speed output. An economy PTO shaft may need less torque than a high-performance model.
Economy PTO shafts come in two basic styles: North American and Italian. These two types are designed to provide constant-speed output and balance the power input of a tractor. There are also various other styles of PTO shafts available, including square and rectangular half-shaft assemblies. You can also purchase extra parts to repair a worn PTO shaft.
The control/monitoring unit in a PTO includes a screen display and a manual control for selecting engaged or disengaged PTO states. In addition, there is a switch in the cab mounted control unit 14 that selects normal and economy modes when driving the PTO. These modes utilize different gears to achieve the desired PTO shaft revs.
To select the right PTO speed, select the lever in economy mode and increase the throttle to the appropriate rpm. The PTO speed should be 540 RPM. The control/monitoring unit 14 will use this information to adjust the clutch control parameters. In addition to the PTO speed, it will also display the torque on the PTO shaft.
Economy PTO shafts are ideal for a variety of applications. These PTOs allow the tractor to run at lower rpms, thereby reducing noise and vibrations. They are typically available in both hydraulic and mechanical types.
China Flat Die Pto Pellet Mill Tractor Driven Pellet Machine     double yoke pto shaftChina Flat Die Pto Pellet Mill Tractor Driven Pellet Machine     double yoke pto shaft
editor by czh 2023-01-04